A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6110-01-502-5617
NSN 5855-00-247-7219
NSN 5835-01-114-9613
NSN 5945-01-473-4154
NSN 5950-00-457-8058
NSN 6150-00-201-9583
NSN 2925-01-239-6044
NSN 5999-00-101-7672
NSN 5950-01-541-7272
NSN 5998-01-254-8138
NSN 5905-00-947-0593
NSN 5915-00-022-7795