No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5895-00-644-5712
NSN 6110-01-116-5841
NSN 5925-01-142-1996
NSN 6620-01-408-4464
NSN 5910-00-964-9981
NSN 6130-00-901-5595
NSN 5975-01-632-2755
NSN 4140-01-108-9084
NSN 5945-00-801-6539
NSN 5855-00-149-0766
NSN 4140-01-027-1871
NSN 5950-00-577-3246