No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5975-01-556-6719
NSN 5835-01-008-4871
NSN 5960-01-431-4291
NSN 6220-00-588-0504
NSN 6130-00-253-3901
NSN 5855-01-605-2438
NSN 6320-00-194-4252
NSN 6130-01-578-7684
NSN 2925-01-289-6448
NSN 6135-01-051-7836
NSN 6650-00-495-5210
NSN 6240-00-143-6558