No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 6650-01-462-0830
NSN 5985-01-574-2125
NSN 6650-01-584-3208
NSN 6135-01-296-1860
NSN 5950-01-069-9844
NSN 5935-00-659-6877
NSN 5895-01-451-4547
NSN 6130-01-043-1794
NSN 5998-01-518-6921
NSN 5935-01-246-2800
NSN 5965-01-015-0744
NSN 6220-00-423-2700