No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5985-01-614-9322
NSN 6645-01-525-7493
NSN 6220-01-459-8017
NSN 5925-01-119-3429
NSN 5915-01-555-7885
NSN 6645-01-428-3576
NSN 5935-00-820-2433
NSN 6220-01-112-5045
NSN 6150-00-479-9512
NSN 5935-01-473-5792
NSN 5910-01-088-8204
NSN 6105-00-393-2489