First end has a 1/2 - 13 internal thread 1 7/16 in. Deep; second end is counterbored to a depth of 3 5/8 in. With a 1 1/4 in - 12 thread 1 1/8 in. Deep at the bottom of bore
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6240-01-346-5550
NSN 6110-01-410-7637
NSN 5990-01-113-8121
NSN 6645-01-171-3242
NSN 6130-01-465-0661
NSN 5895-01-658-9505
NSN 5945-00-080-9692
NSN 5990-00-371-6590
NSN 5915-01-356-7947
NSN 6620-01-203-2153
NSN 6650-01-340-3058
NSN 5925-01-159-2014