No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5935-00-142-9160
NSN 7035-00-861-7913
NSN 4140-00-555-3856
NSN 5999-00-395-2715
NSN 5895-00-324-0578
NSN 5950-00-507-3649
NSN 5905-01-288-9336
NSN 6240-00-167-2467
NSN 5975-01-578-6592
NSN 5905-01-337-6958
NSN 6105-01-300-6832
NSN 5965-00-840-6542