Metric, item 23
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5930-01-216-6525
NSN 5945-00-006-9270
NSN 6130-01-434-6091
NSN 5950-00-413-5028
NSN 6240-00-925-4662
NSN 5855-01-481-6280
NSN 5975-01-211-6594
NSN 6135-01-186-4010
NSN 5985-01-300-4897
NSN 5960-00-965-5577
NSN 6320-01-631-7828
NSN 4140-01-092-0806