No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5998-01-474-1854
NSN 6620-01-603-0852
NSN 6145-01-055-6976
NSN 5835-01-104-4520
NSN 5905-01-471-8380
NSN 6220-01-187-1028
NSN 6620-00-470-0879
NSN 6220-00-997-3223
NSN 6685-00-216-6676
NSN 5996-01-195-3583
NSN 5925-01-659-3316
NSN 6620-01-468-0362