No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-01-619-0517
NSN 6620-01-297-5576
NSN 5910-00-924-8634
NSN 4140-01-592-3151
NSN 5985-01-237-5441
NSN 6135-01-026-9960
NSN 5965-01-234-6844
NSN 5925-00-100-0102
NSN 5930-01-550-5581
NSN 5855-01-308-0955
NSN 5996-01-248-0614
NSN 5996-01-145-2784