Oem cage code: 43pf5 does not sell to the government
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5945-01-304-6778
NSN 6105-01-033-1281
NSN 5945-00-199-6768
NSN 5925-01-079-3206
NSN 5960-01-389-4055
NSN 4140-01-089-7213
NSN 6105-01-445-2915
NSN 6645-01-327-2389
NSN 5960-01-010-3083
NSN 5920-01-096-1864
NSN 4140-01-213-9048
NSN 5920-00-529-0618