Oem cage code: 43pf5 does not sell to the government
No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5915-00-532-7023
NSN 6135-00-452-2266
NSN 5975-00-752-4926
NSN 6620-01-518-9261
NSN 6145-00-791-3233
NSN 6150-01-157-8266
NSN 6110-00-136-9180
NSN 6610-01-346-8241
NSN 6105-01-476-3844
NSN 5935-01-453-6462
NSN 6130-00-763-9613
NSN 5985-00-786-7942