No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 4140-01-049-1375
NSN 6645-01-580-9570
NSN 6135-01-538-3507
NSN 2925-01-030-3598
NSN 6110-01-267-2331
NSN 6130-01-281-8609
NSN 6220-00-152-7114
NSN 5945-01-557-3319
NSN 5935-01-257-0138
NSN 5998-00-863-0202
NSN 6145-01-472-3796
NSN 5950-01-244-4631