A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5895-01-533-9978
NSN 6130-01-416-8837
NSN 2925-01-645-2948
NSN 5895-01-534-6852
NSN 5835-01-250-2939
NSN 5910-01-406-4317
NSN 5855-01-607-4253
NSN 5985-00-941-1794
NSN 6650-00-494-1000
NSN 6650-00-299-9681
NSN 6650-00-957-0714
NSN 6105-01-413-6995