No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5990-01-021-7303
NSN 5985-00-762-9931
NSN 2925-00-654-3206
NSN 5960-01-056-4982
NSN 5950-00-273-4003
NSN 5930-01-202-0187
NSN 6645-01-535-7136
NSN 5965-01-189-4805
NSN 6135-01-027-7543
NSN 6220-01-011-8989
NSN 5935-01-398-7507
NSN 6130-00-153-1338