Shims shall have a peel strength of 1.0 lb/in. To 4.0 lb/in.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Tube or pipe fittings of nickel
NSN 6130-01-069-6698
NSN 6220-00-269-4556
NSN 5950-00-021-2110
NSN 6320-01-392-6922
NSN 5965-01-502-7006
NSN 5935-01-658-8705
NSN 5930-00-339-3451
NSN 6320-01-399-1633
NSN 7035-01-455-3482
NSN 5999-01-183-4251
NSN 5835-00-759-1109
NSN 6650-01-592-2445