No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Gaskets,washers & other seals
NSN 5960-01-424-0590
NSN 6105-01-215-7241
NSN 6135-01-177-3552
NSN 5998-00-165-3084
NSN 5975-01-397-8805
NSN 5935-01-471-3555
NSN 5930-01-274-8759
NSN 6130-01-324-1253
NSN 6145-00-570-0516
NSN 6135-01-031-0862
NSN 7035-00-200-5162
NSN 5935-01-100-2081