Must be straight w/in 0.001 tir when gaged in v-blocks, diameter 0.155 inches, chamfer depth 0.010 inches, chamfer angle in degrees 45, material hardness rating 38.0 rockwell c
No other part numbers with same form, fit, and function found.
A straight shaft having two or more of the following conditions: a specified surface finish designation in the range of 1 to 125 microinches (o.O25 to 3.2 micrometers), arithmetical average (aa), machined peripheral flat(s), circular groove (s), keyway(s), splines, threads, or holes. It is not designed for use in aligning by fitting into corresponding holes of another item. It may be drilled for lubricating holes. For items having an integral gear(s) or worm(s), see gearshaft (as modified). For items designed to support rotating members see axle(1), straight. For items not having the above conditions see pin, straight, headless. For items having machined ends which constitute steps see shaft(1), shouldered; axle(1), shouldered; and bolt, fluid passage.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6105-00-120-9601
NSN 5996-00-985-8952
NSN 5996-01-379-3998
NSN 5930-00-009-2479
NSN 5915-00-857-7257
NSN 5855-00-991-0096
NSN 5905-01-591-7502
NSN 5910-01-398-0621
NSN 5960-01-424-0590
NSN 6240-00-816-1041
NSN 6650-01-113-7563
NSN 5945-00-502-9644