No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5930-00-826-8775
NSN 6240-01-030-8788
NSN 6240-00-038-7540
NSN 6150-00-210-6302
NSN 5925-01-039-6652
NSN 5895-01-198-6809
NSN 6685-00-763-6842
NSN 5915-01-340-0648
NSN 6130-01-241-8953
NSN 6130-01-113-6715
NSN 5950-01-014-6238
NSN 5905-00-896-0228