No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6645-01-265-8708
NSN 5905-01-595-7667
NSN 5935-00-942-1559
NSN 6610-00-583-1084
NSN 5996-00-248-7061
NSN 5960-01-536-9763
NSN 5998-00-147-2591
NSN 6150-01-465-6328
NSN 6220-00-390-1170
NSN 6110-01-517-6612
NSN 6145-00-245-6646
NSN 5935-01-056-9450