No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5925-00-554-4114
NSN 6320-00-456-0836
NSN 5935-01-100-7959
NSN 5920-01-599-8622
NSN 5925-01-214-1362
NSN 6650-01-328-9992
NSN 6620-01-054-9346
NSN 7035-00-252-7467
NSN 5930-01-159-2505
NSN 6145-00-635-5322
NSN 6650-01-196-4667
NSN 5990-01-516-6791