No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5999-01-495-8522
NSN 5895-01-347-1016
NSN 6610-01-595-2847
NSN 6145-00-291-5388
NSN 5990-00-856-9208
NSN 6130-01-659-4359
NSN 5915-00-615-9537
NSN 5985-00-035-4558
NSN 6110-01-204-0919
NSN 5999-00-722-0600
NSN 6150-01-615-1552
NSN 6645-00-526-9476