A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 5925-00-995-1631
NSN 5910-00-345-8351
NSN 4140-01-486-8261
NSN 5965-00-009-8679
NSN 5835-00-005-2311
NSN 7035-01-528-7870
NSN 5950-01-141-7019
NSN 6145-01-147-4968
NSN 5960-01-276-7836
NSN 5910-00-816-9909
NSN 6105-01-534-1903
NSN 6150-01-493-8608