No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5905-00-133-5337
NSN 5930-01-215-0348
NSN 5895-01-016-3837
NSN 6220-01-632-8217
NSN 6150-01-499-0659
NSN 7035-01-432-2424
NSN 6135-00-255-1340
NSN 6105-01-368-7864
NSN 5895-01-409-2949
NSN 5835-00-992-0087
NSN 5975-01-549-2149
NSN 6150-01-502-4619