No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5950-00-407-8283
NSN 6145-00-827-3435
NSN 6240-01-452-1253
NSN 6130-01-271-3505
NSN 6320-01-652-3806
NSN 6320-00-790-4844
NSN 5930-01-111-1219
NSN 7035-00-509-7082
NSN 5985-01-540-5428
NSN 5950-00-170-5041
NSN 5985-00-435-1612
NSN 6645-01-352-6583