No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5910-00-001-4685
NSN 6105-01-152-8496
NSN 5975-00-186-8884
NSN 5895-00-241-9375
NSN 6685-00-761-9655
NSN 6645-01-607-7931
NSN 5999-01-152-1001
NSN 6650-01-491-0858
NSN 5905-01-547-0054
NSN 6685-01-368-4611
NSN 5915-01-545-7642
NSN 5990-00-081-3937