A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5945-01-531-6463
NSN 6105-00-242-6020
NSN 5935-00-984-4561
NSN 6135-00-885-6003
NSN 6650-01-195-3957
NSN 5950-01-144-5555
NSN 4140-01-521-6650
NSN 7035-00-908-4933
NSN 5950-00-972-1312
NSN 5965-01-484-7925
NSN 5998-01-201-0412
NSN 5975-00-752-7644