No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5960-01-086-9650
NSN 6685-00-279-3620
NSN 6620-01-142-8494
NSN 6150-01-553-2345
NSN 6650-01-152-0665
NSN 5965-01-141-6485
NSN 5930-00-571-4706
NSN 5996-00-941-2885
NSN 5996-01-323-7763
NSN 6240-01-389-4457
NSN 5895-00-912-4745
NSN 5998-01-434-5721