No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5985-00-812-9901
NSN 6650-01-364-0299
NSN 5996-01-200-5493
NSN 6110-01-553-8608
NSN 6110-00-922-1014
NSN 6110-00-802-1305
NSN 5965-01-100-4645
NSN 5996-00-403-7981
NSN 5998-01-353-6109
NSN 5915-01-145-9230
NSN 6150-01-060-1301
NSN 5965-01-289-3509