A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Articles of natural cork, nesoi (excluding corks & stoppers)
NSN 5950-01-188-9061
NSN 5855-01-449-8685
NSN 5996-01-323-7763
NSN 5999-01-327-1756
NSN 5905-00-104-9920
NSN 5935-01-313-4441
NSN 5990-01-355-4694
NSN 5950-00-753-7577
NSN 6610-01-221-2606
NSN 5910-01-427-3819
NSN 6110-01-554-1721
NSN 5985-01-601-7047