No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5965-00-877-9197
NSN 5915-00-576-0252
NSN 4140-00-423-6663
NSN 5945-00-452-6286
NSN 6150-01-037-1091
NSN 6220-00-610-9103
NSN 5998-00-009-4411
NSN 6220-01-161-7381
NSN 6110-00-238-9636
NSN 6610-00-488-9528
NSN 5930-01-366-5045
NSN 6645-01-102-2321