Three holes through faces, 0.188 in. Dia, countersunk 100 degrees to 0.344 in. Dia; id is 0.188 in. Off center, 1.062 in. Nom dia
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. It is designed for applications involving moving (kinetic) loads. Except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. The thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). Excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. See also washer, flat and spacer, sleeve.
Classification: Thrust ball bearings
NSN 6320-01-369-3252
NSN 6145-00-467-6433
NSN 5975-00-166-0614
NSN 6685-00-186-9190
NSN 5950-01-157-8898
NSN 5996-01-659-4397
NSN 5930-01-038-6191
NSN 5998-01-482-3690
NSN 5975-01-061-6460
NSN 5960-01-564-5044
NSN 6135-01-436-7733
NSN 5930-01-206-4626