Chamfered 45 degrees on od 0.060 in. Lg
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5975-01-557-3122
NSN 5950-00-540-9283
NSN 6150-01-544-2672
NSN 6610-00-147-1016
NSN 5996-00-250-6556
NSN 5960-00-966-4918
NSN 6145-00-770-4752
NSN 5905-00-922-8806
NSN 5905-01-537-9647
NSN 5960-01-533-5162
NSN 5915-01-152-8014
NSN 6240-01-633-9357