length is 3.25 and the width is 2.0
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Parts of armored fighting vehicles,motorized, whether or not fitted with weapons
NSN 6220-01-464-0668
NSN 5985-00-707-3473
NSN 6650-00-862-7143
NSN 5998-01-219-4823
NSN 6610-01-514-7755
NSN 5895-01-484-9069
NSN 6240-00-841-6367
NSN 5960-00-393-2505
NSN 5905-01-587-3801
NSN 5945-01-068-6752
NSN 6650-01-289-0524
NSN 6620-01-287-1443