No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 6645-01-383-8139
NSN 6105-01-512-2339
NSN 6135-00-660-8654
NSN 5945-00-223-7265
NSN 5930-01-587-3530
NSN 5905-01-298-5208
NSN 5975-01-070-9503
NSN 6685-00-654-9912
NSN 5985-01-157-9426
NSN 5996-00-988-3887
NSN 5960-01-365-8752
NSN 5905-00-959-5730