No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Other articles of nickel, nesoi (excluding cloth, grill & netting of nickel wire)
NSN 6150-01-035-9598
NSN 5965-01-194-3453
NSN 5950-00-726-9202
NSN 5975-01-026-4995
NSN 5999-01-027-3841
NSN 5965-00-722-7574
NSN 6645-00-450-2209
NSN 5975-00-239-9784
NSN 6620-01-542-8709
NSN 5945-01-378-8164
NSN 6610-00-061-7882
NSN 5965-01-045-0247