No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5920-01-512-2054
NSN 5998-00-252-2336
NSN 5915-01-095-1151
NSN 5985-01-381-1201
NSN 5915-00-823-8334
NSN 6150-01-030-6184
NSN 5950-00-566-0428
NSN 5915-00-161-4409
NSN 2925-00-749-8893
NSN 5925-00-910-4932
NSN 6105-01-530-3111
NSN 4140-01-514-2319