Flatted on one side from threaded end 0.36 in. Lg; grooved 0.08 in. Lg on second end 0.36 in. From edge
No other part numbers with same form, fit, and function found.
A shaft having two or more different diameters (greater than 0.031 inches (0.79 millimeter)) along its length. It must have one or more of the following conditions: a specified surface finish designation in the range 1 to 125 microinches (0.025 to 3.2 micrometers) arithmetical average (aa), machined peripheral flat(s), circular groove(s), keyway(s), splines, threads, or holes. The ends and/or shoulders may be machined to accommodate bearings, couplings, and the like. It is not designed for use in aligning by fitting into corresponding holes of another item. For items used to support rotating members see axle(1), shouldered. For items not having any of the above conditions see pin, shoulder, headless. Excludes shaft(1), straight; and axle(1), straight.
Classification: Transmission shafts and cranks, except camshafts and crankshafts
NSN 6320-01-089-9086
NSN 5835-01-059-5535
NSN 6110-01-024-2899
NSN 6320-01-366-5157
NSN 5935-01-449-2518
NSN 6240-01-179-1189
NSN 4140-01-026-0045
NSN 5985-00-597-2966
NSN 6650-00-031-8467
NSN 6320-01-215-2284
NSN 5999-00-881-2178
NSN 5990-01-003-2627