114C3343-1

Plate Spacer

NSN 5365-00-003-8529

DEMIL

Shelf Life

UOM

NIIN

Demil:

Shelf Life:

UOM:

NIIN:

000038529

Product Technical Spec.

Hole Diameter:

Between 0.110 inches and 0.113 inches

Overall Length:

Between 2.590 inches and 2.650 inches

Overall Width:

Between 2.090 inches and 2.150 inches

Outside Corner Bevel Length Along Width:

Between 0.590 inches and 0.650 inches

Outside Corner Bevel Length Along Length:

Between 0.590 inches and 0.650 inches

Center To Center Distance Between Bolt Holes Along Width:

Between 1.057 inches and 1.067 inches

Center To Center Distance Between Bolt Holes Along Length:

Between 1.057 inches and 1.067 inches

Outside Edge To Bolt Hole Center Distance Along Width:

Between 0.770 inches and 0.790 inches

Outside Edge To Bolt Hole Center Distance Along Length:

Between 0.520 inches and 0.540 inches

Bolt Hole Quantity:

Material:

Aluminum alloy 2024

Material Specification:

Qq-a-250/5, t3 federal specification single material response

Surface Treatment:

Chromate or anodize

Surface Treatment Specification:

Mil-c-5541 military specification 1st treatment response or military a 8625, type 1 military specification 2nd treatment response or mil-a-8625, type 2 military specification 3rd treatment response

Style Designator:

Non-circular w/bolt holes

Test Data Document:

77272-abac5423 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.).

NSN:

5365-00-003-8529

Item Name:

Engine Spacer

Cage Code:

77272

Cross Referenced Parts

No other part numbers with same form, fit, and function found.

Part Identification

INC

FIIG

Concept No.

App. Key

Cond. Code

Status

INC:

26979

FIIG:

A07000

Concept No.:

App. Key:

Cond. Code:

Status:

Part Materials

Hazardous material, precious metals, criticality, enviroment, and electrostatic discharge indicators

HMIC

PMIC

ESD/EMI

ENAC

MMAC

CRITL

HMIC:

PMIC:

ESD:

MMAC:

CRITL:

Packaging & Shipping

Est. Pack Size

Est. Pack Weight

Est. Item Weight

Est. Item Dim.

Pack Size:

Paclk Weight:

Item Weight:

Item Dim:

OPI

SPI No.

SPI Rev.

SPC Mkg.

LVL A

LVL B

OPI:

SPI No.:

SPI Rev.:

SPC Mkg:

LVL_A:

LVL_B:

Freight Classification

NMFC

UFC

LTL

LCL

WCC

TCC

SHC

ACC

NMFC:

133300

UFC:

63220

LTL:

RATING VARIABLE

LCL:

WCC:

713

TCC:

SHC:

ACC:

Equipment for Aircraft

We Guarantee with Every Order

100% Genuine Manufacturers Parts
Every Product thoroughly Inspected
Sales Record Retention of 7 years
Fast Delivery
HAZMAT Certified
Global Shipping

Pricing & Availability

Submit this form for current pricing and availability quote on part number 114c3343-1 and/or cross reference parts.

Definition Definition of approved item name (AIN): "Engine Spacer"

A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.