3 inserts 0.164-32unc-3b one end; first insert centered 0.750 from end; two other inserts 0.500 c-to-c 1.375 from end one insert 0.250 from edge; 4 inserts 0.190-32unf-3b other end; first insert centered 0.750 from end; two other inserts in line 0.500 c-to-c 1.375 from end one insert 0.250 from edge; seventh insert centered 2.625 from end; no paint on bottom
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of aluminum nesoi
NSN 6645-01-442-0899
NSN 5999-01-454-7992
NSN 6110-01-394-5302
NSN 4140-00-063-4183
NSN 5960-00-335-3394
NSN 2925-01-314-7916
NSN 5985-01-008-9490
NSN 5925-00-947-7450
NSN 5985-01-623-5739
NSN 6150-01-502-1614
NSN 6220-01-474-0033
NSN 6610-00-840-6187