One of the depth surfaces is both curved and grooved, the curve is along the longitudinal dimension with a radius (outward) of 3.500 in.. The groove is perpendicular to the longitudinal dimension and centered on the aperture. The groove is 0.100 in. Deep, 0.620 in. Wide, and 0.750 in. Long
No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Other articles of iron or steel not wire nesoi
NSN 5895-01-424-0020
NSN 5960-01-411-5217
NSN 6650-01-332-3799
NSN 5996-00-932-5301
NSN 6610-01-062-9994
NSN 6150-01-071-6210
NSN 5835-01-553-6772
NSN 5930-01-362-7984
NSN 5855-01-490-5384
NSN 2925-01-474-3363
NSN 6320-00-925-0558
NSN 5905-01-208-7719