No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5990-00-542-6838
NSN 6105-00-840-5522
NSN 6685-01-370-4238
NSN 6645-01-360-9689
NSN 5930-01-035-2873
NSN 6145-01-649-6317
NSN 5945-01-554-8374
NSN 6145-01-069-0588
NSN 6150-01-322-6388
NSN 5998-01-616-6739
NSN 6320-01-056-1164
NSN 5950-01-173-3274