No other part numbers with same form, fit, and function found.
A flat metal or plastic item of various peripheral shapes having a solid (not laminated) cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole having a solid rectangular cross-section use disk, solid, plain. For round or hexagonal items with only one hole centrally located and with the length (thickness) exceeding 25 percent of the outside diameter or distance across peripheral flats, see spacer, sleeve. The thickness between the two parallel bearing surfaces must be 0.006 inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across the peripheral diameter, or smallest overall outside dimension, or must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or greater across the peripheral diameter or smallest overall outside dimension. For items with a thickness less than those indicated above, see shim. For items with one hole centrally located conforming to the above dimensional criteria use washer, flat or spacer, ring as applicable. When thickness and/or outside diameter or smallest overall outside dimension is designated as a tolerance/dimension the maximum dimension will be used to determine compliance. Excludes gasket; insulator (as modified) and mounting pad, electrical-electronic component.
Classification: Articles of aluminum nesoi
NSN 4140-01-411-5908
NSN 5905-00-468-4049
NSN 5925-01-281-7511
NSN 5965-01-053-7168
NSN 5910-01-170-5074
NSN 6320-00-300-5556
NSN 5910-00-186-0917
NSN 5960-01-425-1454
NSN 6130-01-406-3725
NSN 6650-01-382-8569
NSN 6150-00-484-4647
NSN 5975-00-364-6919