A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5905-00-954-9138
NSN 5950-01-646-1253
NSN 6610-00-149-1534
NSN 5925-00-741-1479
NSN 5960-01-550-8038
NSN 5935-01-634-0668
NSN 5935-01-236-3903
NSN 2925-01-381-5307
NSN 6685-01-282-3017
NSN 5920-00-148-8176
NSN 5895-01-147-0954
NSN 5985-01-498-9690