2 per package
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
NSN 5835-01-615-0451
NSN 5895-01-337-9326
NSN 6220-00-269-4556
NSN 4140-01-472-2768
NSN 6685-01-466-2760
NSN 5910-01-541-5950
NSN 2925-01-415-2140
NSN 5975-01-535-7193
NSN 6645-01-565-6973
NSN 6685-01-634-0611
NSN 5930-01-214-8256
NSN 5985-01-266-3562