A high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. The head is designed to accommodate an external wrench or driver. The head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. The unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. Items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. The nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. A locking feature may be incorporated in the design of the head or threads. See bolt, machine and bolt, clevis.
Dept. of the Air Force 
Dept. of the Navy 
Poland 
Israel 
Singapore 
Belgium 
Republic of Korea 
Netherlands 
Portugal 
Italy 
Denmark 
Norway 
Greece 
Turkey Classification: Bolts and bolts and their nuts or washers exported in the same shipment
NSN 5960-01-533-5162
NSN 5905-00-401-0310
NSN 6240-01-336-4796
NSN 5998-01-055-0425
NSN 6145-00-201-1330
NSN 5915-01-016-0169
NSN 6150-01-112-4254
NSN 6220-00-298-9300
NSN 6645-01-458-8379
NSN 5935-01-096-8058
NSN 6105-01-476-7748
NSN 5998-01-180-6316