No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-01-268-7104
NSN 6220-01-147-7219
NSN 5996-01-333-0570
NSN 6645-01-281-7254
NSN 5950-01-441-1328
NSN 5999-01-658-8871
NSN 4140-00-892-5952
NSN 5990-01-104-0469
NSN 6130-00-189-8000
NSN 5920-00-605-4741
NSN 5996-00-633-4308
NSN 5990-01-105-0260