Shim is c shaped, outer periphery truncated between the radial center lines of leading pair of holes
No other part numbers with same form, fit, and function found.
A thin flat metal or plastic item of various peripheral shapes having a solid or laminated cross-section. It is designed to maintain a predetermined distance between two surfaces. For round items without a hole and having a solid rectangular cross-section use disk, solid, plain. Items with either (1) a solid (not laminated) cross-section, or (2) a non-separable laminated cross-section with one hole centrally located, must have a thickness less than 0.006 inch (0.152 mm) for items less than 1/4 inch (6.35 mm) outside diameter or shortest distance across peripheral flats, and less than 0.016 inch (0.406 mm) for items 1/4 inch (6.35 mm) or more outside diameter, or shortest distance across peripheral flats. for items with thickness greater than those indicated above, see spacer, plate; washer, flat and spacer, ring. when thickness and/or outside diameter or shortest distance across peripheral flats is designated as a tolerance dimension, the maximum dimension will be used to determine compliance. See also shim stock, laminated; shim stock assortment, gasket; and bearing, washer, thrust.
NSN 6320-01-283-1300
NSN 5925-01-246-4520
NSN 6150-01-055-5424
NSN 5930-00-964-7363
NSN 5985-00-471-6077
NSN 5990-01-571-7468
NSN 5985-00-284-0967
NSN 7035-01-604-9813
NSN 6620-01-283-1338
NSN 6610-00-850-4910
NSN 5835-01-424-0054
NSN 7035-00-281-4082