A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 5996-01-392-5831
NSN 6610-01-605-1509
NSN 6105-00-159-1061
NSN 5996-01-091-1968
NSN 6130-01-495-1421
NSN 6650-00-932-2048
NSN 6150-01-149-0515
NSN 6240-00-551-3144
NSN 6620-01-507-3276
NSN 6610-01-352-5500
NSN 6320-01-143-3597
NSN 6610-01-059-2734