No other part numbers with same form, fit, and function found.
A washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. The hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). The thickness cannot exceed 25 percent of the largest outside dimension. When the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. The maximum tolerance is applied to dimensions and used as a determining factor. Items with separable lamination use shim. For items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. Excludes disk, valve, graphite impregnated and lubricated items.
Classification: Washers other than lock washers, iron or steel
NSN 6240-00-235-5159
NSN 4140-00-946-6478
NSN 5998-00-709-0613
NSN 5996-00-731-0417
NSN 5960-01-232-3100
NSN 6610-01-495-8898
NSN 5920-01-483-1516
NSN 6240-01-562-3223
NSN 5960-01-107-3272
NSN 5920-00-987-1605
NSN 5920-01-130-3189
NSN 5905-00-173-3418